Difference Between Squirrel Cage & Slip Ring Induction Motor - SKengineers

-

 

DIFFERENCE BETWEEN SQUIRREL CAGE INDUCTION MOTOR & SLIP RING INDUCTION MOTOR

Sr. No.

COMPARATIVE POINTS

SQUIRREL CAGE INDUCTION MOTOR

SLIP RING INDUCTION MOTOR

1.

CONSTRUCTION

More simple and robust construction.

Less simple construction.

2.

COST

Cheaper

Costlier

3.

STARTING

The motor requires

1.      Star delta stater.

2.      Stator resistance starter.

3.      Auto-transformer starter.

The motor requires

1.      Rotor resistance starter.

4.

STARTING TORQUE

Low starting torque.

High starting torque.

5.

PULL OUT TORQUE

greater

lesser

6.

EFFICIENCY

More efficiency

Less efficiency

7.

POWER FACTOR

Better

poor

8.

SPEED CONTROLLING

Speed controlling difficult.

Speed controlling easier.

9.

MAINTENANCE

Requires less maintenance.

Requires more maintenance.

10.

FIRE HAZARDS

Safer from the view point of fire hazards as there are no rubbing contacts.

Risk of fire hazards due to sparkling at the brushes.

11.

APPLICATIONS

1.      Lathe machine

2.      Fan

3.      Blower

4.      Drilling machine

 

1.      Hoist

2.      Cranes

3.      elevators

12.

BRUSHES

Absent

present

Comments

Post a Comment

Popular posts from this blog

What Is A Liner In Automobiles? - SKengineers

-
Image
  WHAT IS A CYLINDER LINER? It is a cylinder that is fitted to the engine block to form the cylinder, and is one critical function part that forms the engine interior. In Japan they are usually called Cylinder Liners, but some countries (companies) call them Cylinder Sleeves. 3 functions of Cylinder Liners - Function 1 Form the sliding surface - Reciprocating movement/Liner/Cooling water/Sliding surface Tightly holds when the valve is seated, prevents compressed gas or combustion gas leaking into the manifold from between the valve and Valve Seat. High burn resistance Low self-friction Low friction with the piston ring Low lubricating oil consumption Function 2 Heat conduction - Combustion heat/Liner/Cooling water Reduces vale and cylinder head friction at the same time. Function 3 Keep airtightness - Explosion/Stop the gas/Gas leaks Prevent compressed gas and combustion gas leaking out. The liner should not be prone to deformation due to the high pres...
Read more

Cutting Tool Nomenclature - SKengineers

-
Image
  CUTTING TOOL NOMENCLATURE 1.       SHANK –               Main body of the tool. 2.       SIZE –          Width, height and overall length of shank. 3.       FLANK –              The surface below and adjacent to the cutting edge. 4.       HEEL –             The intersection of flank and base of tool. 5.       FACE –            The surface on which the chip strikes. 6.       CUTTING EDGE –                              The portion ...
Read more

What Is Alternator? - SKengineers

-
Image
  WHAT IS ALTERNATOR ? Ø   INTRODUCTION – ·         The emf induced in the conductors that are placed in the armature slots is A.C. but by the action of commutator and brushes, it is converted to D.C. ·         Due to the availability of electronic components D.C. generators can be replaced by rectifier-filter power banks. ·         But, it still becomes essential to use the A.C. supply to desired frequency in many circuits. ·         Similar to the D.C machines, the A.C. machines associated with alternating voltages are also classified as generators and motors. ·         The machines that generate A.C emf are called synchronous generators or A.C. generators. It is also called as an alternator. ·         An alternator can be run as a motor called synchrono...
Read more